XCMG Official 18m Articulated Boom Lift GTBZ18A1 China New Hydraulic Self Propelled Mobile Boom Lift Platform.
For 18m level "Σ" type linkage folded hybrid boom aerial work platform, its readability, operating performance and humanization has reached to the advanced level in the industry.
The linkage folded hybrid arm has compact structure and flexible stretching, which is easy to get to the unreachable areas; with four-wheel drive, off-road wide tires and axle balancing device, the equipment has excellent drive and terrain adaptability.
The model manipulation is simple, safe, reliable, accurate and efficient, which can meet the requirements of the construction, petrochemical, venues, leasing and other industry users.
Advantages and highlights:
1. The undercarriage assembly
* The running mode is subject to hydraulic driving, and the driving mode adopts four-wheel drive; besides, it can meet the driving requirements of vehicle under different environments.
* The running mechanism possesses self-braking function; which can facilitate dragging, in case of any faults.
2. Arm rest assembly
* The aboard combined arm assembly refers to the folded arm + telescopic arm + one section of crank arm.
3. Rotary table
* The rotary table is set as per hinge joints of single stiffened plate, and the counterweight is set behind it.
* With respect to the counterweight, fuel tank, hydraulic oil tank and control cabinet are set on the left side of the rotary table.
* The engine and accumulator are set on the right side of the rotary table.
4. Hydraulic system
* Two-pump drive is adopted for the hydraulic system, and the direct drive of the engine will provide power for the hydraulic system.
5. Electrical system
* Distributed PLC control technology is adopted for the electrical system, and the controllers are set on the platform and rotary table respectively.
* The rotary table and platform controller are communicated via CAN bus, to achieve the control of chassis, rotary table, boom and platform.
product parameter
Item |
Unit |
Parameter |
a. Overall length |
mm |
9080 |
b. Overall width |
mm |
2490 |
c. Overall height |
mm |
2680 |
d. Wheelbase |
mm |
2500 |
Maximum working height |
m |
20.3 |
Maximum platform height |
m |
18.6 |
Maximum working range |
m |
11.9 |
Maximum load weight |
kg |
230 |
No.1 arm luffing range |
° |
0 ~ +70 |
No.2 arm luffing range |
° |
0 ~ +75 |
Crank arm luffing range |
° |
-65 ~ 70 |
The swing angle of the rotary table |
° |
360 |
Maximum tail wagging |
mm |
0 |
Platform size |
mm |
1830×760×1150 |
The swing angle of the platform |
° |
180 |
Machine weight |
kg |
10600 |
Maximum travelling speed |
km/h |
6.0 |
Minimum turning radius |
m |
6.0 |
Minimum ground clearance |
mm |
230 |
Maximum gradeability |
% |
45 |
Tyre size |
|
355/55D625 |
Motor model |
|
Perkins 404D-22
Deutz D2011L03i |
Rated power of motor |
kW/(r/min) |
38KW/3000rpm,
36.3 KW/2800rpm |
product show